ZHENGZHOU SONGYU HIGH TEMPERATURE TECHNOLOGY CO.,LTD
ZHENGZHOU SONGYU HIGH TEMPERATURE TECHNOLOGY CO.,LTD
Add to Cart
W type Mosi2 Heating Element
1800 degree silicon molybdenum rods are used for ultra-high temperature test furnaces, with a temperature range of around 1700-1800 degrees Celsius. Components with a diameter of 4/9 or 6/12 can be selected. Of course, sometimes if the electric furnace is very small, a diameter of 3/6 can be used (mainly depending on the size of the furnace). Choosing the appropriate specifications of silicon molybdenum rods is crucial for the electric furnace, considering the operating temperature, power, and voltage. Generally, they are arranged according to the length of the furnace, and are mostly U-shaped silicon molybdenum rods. Some manufacturers want to increase the temperature quickly by increasing or decreasing the diameter of the hot end of the silicon molybdenum rod by one millimeter. However, the number of silicon molybdenum rods installed in the electric furnace depends on the power and voltage, but it is also possible to reduce the number of rods if the voltage cannot be reached. The distance between the rods should be the same as the center distance of the same specification, and the diameter of the silicon molybdenum rod should be reasonably determined according to the temperature requirements of the electric furnace.
| Voltage | 220V/380V |
| Heating Zone | Single/Double |
| Thermal Shock Resistance | Good |
| Diameter | 3/6/9/12mm |
| Material | Mosi2 (Molybdenum Disilicide) |
| Length | 100/200/300/400/500/600/700/800/900/1000mm |
| Features | High temperature resistance, fast heating, long service life |
| Application | High temperature furnace, vacuum furnace, sintering furnace, heat treatment furnace, etc. |